NVR non trova IP cam

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
Hello, I purchased an NVR branded OWS.
It has only one ethernet port and can support up to 4 ip cameras.
but I'm not able to add them.
I've setup the network and static IP of NVR but in the list of IPC, there is a button Search ... and it doesn't find them.
There is not a Manual add ... button.
They NVR is correctly connected to newtork.
What can I do?
 

marino51

Utente Attivo
28 Feb 2013
3.203
207
63
Lombardia
network setup with a simple configuration,
the NVR and the cameras (devices) should be connected to the same lan switch ( 8 ethernet ports, 6 used )
all the devices must have the static ip address assigned, included in the network range,
choosing ips which are not in conflict with the existing dhcp or existing statics
the ip first 3 octects must be the same for all the devices and the fourth must be a specific number for each device
the switch is connected to the internet router ( "home style" 4 ethernet ports, 1 used )
using a "cross" cable or pushing the "cross" button associatet to the switch port
the solution keeps the cams lan traffic separated, influencing only the lan switch
and routing it to the internet router only for internet access pourpose
the NVR should find the cams, try it or describe your network topology
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
I have different cameras on the network but basically for test purpouses I connected 1 cam to modem/router and NVR conected to the same modem\router. NVR still no find connected camera.
My usual configuration is with one cam connected to the modem\router, other three connected via Wifi and Wifi client.
Same network. DHCP is active on modem\router but cameras has static IP outside DHCP range. NVR the same.
 

marino51

Utente Attivo
28 Feb 2013
3.203
207
63
Lombardia
Same network. DHCP is active on modem\router but cameras has static IP outside DHCP range. NVR the same
... IP from the same (dhcp) router range, i.e,
192.168.1.1 ROUTER
192.168.1.254 NVR
192.168.1.253 CAM1
....
check the user and psw on cams, if required
check if a NVR & CAM "group" is necessary
try to post the pics of the NVR & CAM network settings

otherwise somebody with a specific know how on OWS shoud help
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
here there are. Yes same router range. Password and user there is not written explicitly on manual nor groups.
 

Allegati

  • 20161012_234634.jpg
    20161012_234634.jpg
    127,1 KB · Visite: 620
  • 20161012_234720.jpg
    20161012_234720.jpg
    97,7 KB · Visite: 628
  • 20161012_234749.jpg
    20161012_234749.jpg
    615 KB · Visite: 691
  • 20161013_082546.jpg
    20161013_082546.jpg
    81,4 KB · Visite: 591

marino51

Utente Attivo
28 Feb 2013
3.203
207
63
Lombardia
so, the 4 cams were added, they are listed with the status "no video",
from your last pic, a vga screen, an usb device and the power supplier are connected to nvr
the ethernet is not connected, how can you verify the dialog between the devices without ethernet?
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
Don't pay attention to ethernet cable in that picture. Obviously I tested the system with ethernet cable connected.
Moreover, I have not added cams. They are not discovered.
 

marino51

Utente Attivo
28 Feb 2013
3.203
207
63
Lombardia
from the first pic, there are 4 cams added,
if I understood well 4 is the max cams managed by the nvr,
so this is why you cannot add more,
you can remove them all and try "search" and "add"
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
but I have not added any IPcam! I swear! Look at discovered cams!!! no cam has been discovered!
 

marino51

Utente Attivo
28 Feb 2013
3.203
207
63
Lombardia
but I have not added any IPcam! I swear! Look at discovered cams!!! no cam has been discovered!
I saw it, 4 cams were added (they are in the "added IP camera" list), probably the nvr software doesn't search for more

if possible, try to select a cam in the list and manually "fix IP" (button)

maybe cams aren't onvif standard? I'm not sure about this
the last
but, before as a second try, remove 1 cam and search ....
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
yes, but if cams are not onvif (I don't knwo) I took them on eBay two years ago......
there is a way to bypass this problem?
 

frankge973

Nuovo Utente
12 Ott 2016
8
0
1
it's not possible to remove them.... I suppose there are no cam added.... those entries are only as placehoders.... I clicked remove all but nothing appeared. Fix IP button displays only a windows with a checkbox Fix IP range 192.168.1.2-192.168.1.254 . but moreover it is not deselectable.
 
Discussioni simili
Autore Titolo Forum Risposte Data
F Telecamere Wi-Fi non si connettono A nvr IP Cam e Videosorveglianza 0
P come posso visualizzare l'nvr online IP Cam e Videosorveglianza 0
M Errore configurazione motion detection nvr Hikvision DS-7616 IP Cam e Videosorveglianza 0
A Quale NVR con ingressi bnc ? IP Cam e Videosorveglianza 1
M Nas o nvr con ipcam? IP Cam e Videosorveglianza 4
S NVR Hikvision : è on-line solo di giorno senza nessun motivo IP Cam e Videosorveglianza 17
S Telecamere Dahua HFW4431R-Z su NVR Hikvision IP Cam e Videosorveglianza 0
bmsolution Problema con Nvr Jeminex. IP Cam e Videosorveglianza 0
G Sostituzione NVR IP Cam e Videosorveglianza 1
G Server NVR offline con Firefox 22.0 IP Cam e Videosorveglianza 3
O E' possibile usare NVR solo IP camere remote? IP Cam e Videosorveglianza 2
M Collegare due NVR nella stessa rete IP Cam e Videosorveglianza 0
G Configurazione IP Camera e NVR Zmodo IP Cam e Videosorveglianza 0
felino Mac OS e Client Mail: Stato non in linea Mac e Software 1
I nome utente non esiste nel database PHP 1
M Drag and Drop non capisco le sequenze... Javascript 1
L Suggerimento Pagespeed per non vedenti HTML e CSS 0
F comando di inclusione file audio in I-Pad non funziona HTML e CSS 1
M Immagini non usate WordPress 0
B Non riesco a trovare i cognomi con i caratteri speciali in Access (Microsoft 365) MS Access 0
G Numero zero null non deve visualizzare nulla PHP 0
F Paypal _xclick IPN non risponde PHP 1
R Variabile non risconosciuta dentro una funzione PHP 1
C ACCESS Aprire maschera se valore non presente in una combo MS Access 7
E Alert non viene mostrato PHP 1
felino Hardisk WD SATA 1TB 3.5" non si avvia! Hardware 4
K Scrip non funzionante Javascript 1
R jquery che cambia css di un elemento non mi funziona sulla pagina caricata da ajax Ajax 5
zorro CREATE TABLE non funziona PHP 6
L tipo boolean non funzionante su mariadb (mysql). E codice php 7.4. PHP 0
Sevenjeak Php8 non carica estenzioni PHP 0
R query DELETE non cancella i record PHP 1
otto9due Input text: accetta solo numeri e non può essere vuoto. Javascript 9
G Non vedo frecce su forme Photoshop 2
G Il mio sito dopo aver abilitato l'ssl non visualizza le immagini con indirizzi senza ssl HTML e CSS 0
P jquery refresh div non funziona Javascript 0
N Problema SEO "L'URL non si trova su Google" SEO e Posizionamento 4
S Certificato SSL non funzionante Domini 0
zorro modulo di registrazione: funziona ma non sempre PHP 2
D Form contatti non funzionante HTML e CSS 0
MarcoGrazia Trovare record nel database partendo da id non sequenziali PHP 6
M Non ho rinnovato il mio sito su Aruba... Domini 1
T IP INFO NON FUNZIONA PHP 0
Shyson Google search non trova il mio sito SEO e Posizionamento 1
E Estrarre dati da doppia tabella, banale ma non sempre PHP 1
P Data scraping in PHP non funziona PHP 4
otto9due $_FILE non passa i dati dal form PHP 1
keyascii Non è mai troppo tardi Presentati al Forum 0
N dati tabella non presi PHP 1
P Pagina modifica record che non funziona PHP 0

Discussioni simili